Articles for the Trex 600n
Back to articles section home page
The listing below contains links to maintenance articles for the Trex 600n.
All articles now link to the same article on helituning.com - please use helituning in future
| Article | Date | Link | |
|---|---|---|---|
 |
Replacing the Trex600n clutch | 12th November 2008 | Complete |
 |
Fitting a governor sensor to the Trex600n | 13th April 2008 | Complete |
 |
Building a governor sensor for the Trex600n | 13th April 2008 | Complete |
 |
Removing the engine | 20th December 2007 | Complete |
 |
Replacing the shaft drive gears | 13th November 2007 | Complete |
 |
Building the tail gearbox | 13th November 2007 | Complete |
 |
Removing the tailboom assembly | 13th November 2007 | Complete |
 |
Replacing a tailboom brace | 5th November 2007 | Complete |